So you bought a brand new vinyl decal and now you need to know how to apply it? Well you’re in luck! Just follow these easy steps and you will be a pro in no time!
Step 1) Run a small plastic squeegee or a credit card over the surface of the decal to activate the decal application tape. (it may be clear plastic or white paper)
Step 2) Clean and dry the flat, smooth surface where you want the decal to be applied.
Step 3) Slowly separate and remove the application tape with the attached decal from the paper backing. If the decal stays on the paper backing, just run over it once more with the squeegee before trying again.
Step 4) Place the decal onto the surface and run over it with the squeegee to smooth out any bubbles. (When placing the decal, it may help to arc the decal and set it starting from the middle, working your way toward the outside.)
Step 5) Slowly remove the application tape so that the decal remains on the surface. If the decal begins to peel up, run the squeegee over it and try again.
Step 6) Discard the application tape and enjoy!
All of our decals are pressure sensitive and seal after about 10 minutes of application. So once it’s applied be sure not to wet it or scrape it for at least 10 minutes after applying.
PRO TIP: Don’t apply when items are extremely HOT or COLD. If applying to your car window, leave the car in the shade for a bit to allow the windows to cool first.
CLICK HERE to download a printable instruction sheet with images.
Share this post